www.brewersperformance.com/store.asp
As time progresses,
mechanical and cosmetic improvements are incorporated into
our current designs and become standard. Most changes will
be minor, but some cosmetic designs are very noticeable.
Please call 937-947-4416 or 937-698-4259 for any Ordering Questions
 |
For Credit Card
|
Dodge Ram truck 5-6 speed
Shifters
The shifter is preassembled with Carbon
Fiber Composite grips, a 5 or 6 speed shift
indicator and our NEW AND IMPROVED
ADAPTOR. This new adaptor system contains
a rubber isolator to stop noise and
vibrations from the
transmission. Depending how you position the
seat plus your height, you may want to opt
for either the long or short shifter. Installation is an easy 5 step process that
may take from 15 minutes to over an hour.
Installation Instructions
#1. Lift up the removable boot and unscrew the round factory shifter. It will be necessary to pry the shift indicator out to loosen the hidden nut holding the ball grip to the handle. After ball grip is removed, slide boot off shifter.
#2 Screw on the rubber isolator stem to the transmission finger and tighten.
#3 Slide the black adaptor over the rubber isolator until it stops, slide shifter thru boot, attach shifter to the adaptor and tighten shifter bolts.
#4 Position the shifter and tighten the 2 set screws on the back of the adaptor.
#5 Reassemble boot/console
You are ready to Rock and Roll with your new Gunslinger Handle. Enjoy and have fun.
